DragonOSD+ firmware upgrading

Support related stuff, for various products
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 5.5

1. Fixed PPM validation that was too stringent causing passthrough to fail
2. Minor cosmetic changes
3. Cleaned up PPM diagnostic display
4. Activates autopilot on glitchy/invalid PPM frame

Daniel
Attachments
DOSD55.zip
(89.09 KiB) Downloaded 626 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 5.6

1. Narrowed the range used for control channel so that radios with narrower end-points can activate modes

Note: With this version, you may need to adjust your previously set mode activation points.

Daniel
Attachments
DOSD56.zip
(89.17 KiB) Downloaded 637 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 5.7

1. Further relaxed the PPM validation criteria
2. Also altered the second validation method for more rigorous response to glitches

Daniel
Attachments
DOSD57.zip
(89.14 KiB) Downloaded 635 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 5.8

1. Comprehensive serial terminal command set added
2. Added support for pan and tilt channels
3. Inserted delay before IMU detection to allow for slow starting IMUs
4. Qualified calculated distance to reject spurious GPS data
5. Reduced glidescope sensitivity, margin from 5% to 20%
6. Added graphical VSI indicator to alt. ladder, slaved to VSI activation
7. Added rudimentary pan indicator
8. Added version command to serial terminal command set
9. Correctly returns status for query
10. MINVALID was showing as a float, now integer
11. Constant PPM frame validation removed

Daniel
Attachments
DOSD58.zip
(99.8 KiB) Downloaded 643 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 5.9

1. Fixed mode change screen redraws. Some code was left out.

Daniel
Attachments
DOSD59.zip
(99.51 KiB) Downloaded 662 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 6.0

1. Optimized rendering of graphical VSI slightly
2. Minor cosmetic change to glidescope display

Daniel
Attachments
DOSD60.zip
(99.66 KiB) Downloaded 634 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 6.1

1. Fix rendering bug in graphical VSI

Daniel
Attachments
DOSD61.zip
(99.73 KiB) Downloaded 648 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 6.2

1. Fixed SiRF module detection
2. Fixed barometric sensor detection for BMP type sensors
3. Added elevon mixing mode and associated terminal commands (untested) - two mix modes
4. Added option so that PWM outputs can be assigned to elevons 1 and 2
5. Added IMU based stabilization (untested)
6. Added tilt indicator - tested and reversed direction drawn
7. Added support for gain channel
8. Added adaptive scaling to compass mode 4, 500m, 2km, 10km
9. Minor cosmetic change to compass mode 4
10. Improved glidescope drawing routine
11. Added more data qualification for GPS data
12. Added GPS rate display in diagnostic screen (globalized delta)
13. Added more checking for IMU when stabilizing
14. Added GPS data display when having poor or no GPS reception
15. Fixed elevator direction in stabilizer
16. Using a different scheme for stabilizer, may be smoother

*Note that this version will reset all settings to default so write them down somewhere if you want to keep them.

Daniel
Attachments
DOSD62.zip
(102.33 KiB) Downloaded 636 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 6.3

1. Globalized lonq and latq checks
2. Fixed logging problem with western and southern hemisphere coordinates

Daniel
Attachments
DOSD63.zip
(102.31 KiB) Downloaded 636 times
Daniel Wee
Site Admin
Posts: 2449
Joined: Wed 25 Feb 25 2009 8:00 pm

Re: DragonOSD+ firmware upgrading

Post by Daniel Wee »

Version 6.4

1. Fixed display format of auto-stabilize gain
2. Increased granularity of auto-stabilize gain
3. Fixed compass mode 3 heading display
4. Fixed compass mode 4 heading display
5. Fixed minor cosmetic bug is GPS coordinate display

Daniel
Attachments
DOSD64.zip
(101.93 KiB) Downloaded 649 times
Post Reply